A world first " built in" aluminum self supporting construction which requires no hard luggage rack and maintains its shape (excludes Cargobag & Rackpack)

 Racetrack tested

Separate access to main and side compartments.

Hand-made from an industry leading 1200 denier

high-tenacity ballistic nylon yarn which surpasses leather, Cordura and nylon in strength. Ballistic nylon is approved by the U.S. Military for use in bulletproof vests. Tough enough for the military and bike touring.

In abrasion tests conducted against nylon and leather, ballistic scored highest. Leather scuffed at 25 cycles, nylon failed at 295 cycles, while ballistic was only affected after 3000 cycles. In tests conducted to measure tear resistance, nylon started tearing at 5 lbs, Cordura tore at 74lbs, but ballistic held strong at 250 lbs!

Waterproof,seam sealed separate inlays.

All internal material is also lined with a water–

resistant PE polymer. 

Purposely designed to reduce drag .The semi-circle design with bottom sidebags enables the system to remain within the air stream of the bike.

Adjustable volume via built in compression straps further minimizes drag ensuring the luggage is never larger than it needs to be.

Shoulder straps for off bike use.

Reflective webbing adds conspicuity at night.

    Heavy-duty zippers with oversized pulls for easier

     manipulation with gloves.

Quick release buckles for easy removal and fitment. 

Proper clearance between exhaust and sidebag.
 

WHAT DO I NEED FOR MY BIKE?

The Bags-Connection range of motorcycle soft luggage/saddle bags fit a broad spectrum of models.

1. The Cargobag,and Rearbag will fit 
    virtually any model. No racks are required.

2. The Speedpack Wide is designed for bikes with a
    tail section width up to 42cm. No racks are
    required.

    For bikes with exhausts that are swept high up
    (close to the seat and exposed) refer to the
    dimension drawing in the Speedpack Wide brochure

    to ensure adequate exhaust clearance.

    The exhaust should be at least 250mm from the
    top of the seat ONLY if it is exposed (not tucked    
    under the side panel). 

    Should the exhaust conflict then the Racepack 
    (similar to the Speedpack Wide but without the  
    bottom bags) will fit
    
4. The Speedpack is designed for bikes with a 
    tail section width up to 22cm. No racks are 
    required.

    For bikes with exhausts that are swept high up
    (close to the seat and exposed) refer to the 
    dimension drawing in the Speedpack brochure to  

    ensure adequate exhaust clearance.

    The exhaust should be at least 280mm from the
    top of the seat ONLY if it is exposed (not tucked

    under the side panel).

    Should the exhaust conflict then the Racepack 

    (similar to the Speedpack but without the bottom 

    bags) will fit.
  
5. Optional - Tentbag.

    Fits the Cargobag, Racepack, Speedpack Wide and
    Speedpack.